FEATURES :

1. Antenna distributor design for mult channel fstructure , up to 4 sets receiver can receiving wireless signal from a pair of antennas.

2. Built-in high frequency amplifying device , no consumption during operation 

3. Antenna distributor can provide power supply to 4 sets receiver and 2 set antenna amplifier simultaneously.

4. Antenna amplifier usage is in order to deal with the consumption of wireless cable.

5. Only one power adapter can supply power to antenna distributor , all receiver and antenna amplifier. 

6. A pair of antenna can be use with two antenna distributor. 

7.Install two set of antenna distributor and one set antenna distributor and on set wireless receiver.

SPECIFICATION：

Antenna distributor PA-01 :  2×1  4 or 1×1 : 8, active

Connector cable：8 pcs , 50cm , BNC

Frequency range：470-980MHz(-3dB)

Amplifier

In A-OUT A：0±1dB

IN A-OUT A1 to A4：0±1dB

IN B-OUT B1 to A4：0±1dB

IIP3：20dBm (minimum ) 20dBm (classical )

Impedance：50Ω

Reflection loss：10dB( all high frequency output )

Operation voltage：12V DC(power adapter )

Power consumption：200mA

Total power consumption：Max 2.0A , 4 set receiver and 2 antennaDistributor

Through ANT RF IN A and ANT RF IN B supply power to antenna distributor ：12V，500mA

Through A1 to A4 supply power to receiver ：12V (Prevent feedback power )，500mA

Relative Air humidity ：5 to 95%

Operation temperature range ：-10℃ to+55℃

Store temperature range ：-20℃ to+70℃

Size ：215x150x42mm

Weight ：1000g